Mortech Manufacturing 600038 Autopsy Carrier Line with Rollers

The Model 600038 Autopsy Carrier with Rollers is a versatile and durable solution for the removal and transport of cadavers. This carrier is designed as an integral part of the Total Roll System for easy loading and unloading of bodies. The carrier is available in four sub-models:

Each model is economically priced and built to withstand heavy duty use. They are designed for use with our Series T3626 Standard Body Tray. The 600038-TL model has a total locking caster system, including a directional lock to assist in the steering of the carrier. The 600038-C model has a hand-cranking system to assist in elevation of the head-end of the table. The 600038-FRC model has front and rear hand-cranking system to assist in elevation for working comfort and drainage of overflow liquids and debris. The 600038-H model is a multi-functional hydraulic carrier designed for hospitals, coroner’s facilities and mortuaries. This carrier is made of durable and economical stainless steel and adjustable height body transporter.

Description

• TOTAL LOCKING MECHANISM: Enables the carrier with “ONE LOCATION” locking to all casters, “ONE LOCATION” directional locking to assist in the steering of the carrier and “ONE LOCATION” locking release or neutral position.
• 600038-TL: Total Locking Caster system with a permanent slope of 1.5 in./3 cm.
• 600038-C: Carrier with rear elevation, adjustable up to 6 in./15 cm.
• 600038-FRC: Carrier with front and rear elevation, adjustable up to 6 in./15 cm.
• 600038-H: Carrier with hydraulic front and rear elevation, adjustable up to 13 in./33 cm.
• Designed as an integral part of the Total Roll System for easy loading and unloading of cadavers.
• Acts as a transfer carrier and autopsy carrier.
• Economically priced yet still performs well under heavy duty use.
• Designed for use with our Series T3626 Standard Body Tray.
• Durable and economical stainless steel adjustable height body transporter.
• Ideal for use in hospitals, coroner’s facilities, and mortuaries.
• Front and rear hand-cranking system to assist in elevation for working comfort and drainage of overflow liquids and debris.
• Head-end tilting for working comfort and drainage of overflow liquids and debris.

Additional information

Model Configurations

, , ,

• Width of 26.5 inches/67 cm
• Length of 80 inches/203 cm
• Adjustable height range of 33 inches/84 cm (at the foot) to 34 inches/86 cm (at the head)
• Maximum design load of 500 lbs/227 kg
• Minimal manual handling required for cadavers
• Permanent slope of 2 inches/5 cm
• Frame constructed from 1.5 inches/3 cm square, .12 tubing thickness, 304 stainless steel tubing
• 8 inches/20 cm casters with brake mechanism
• Flip latch to securely hold tray during transport
• 10 maintenance-free nylon rollers.

Menu
AI Nav