ARES Scientific
+844 444 ARES
Find a Rep
Cart
This image depicts the Kubtec XCELL, a free-standing X-ray irradiator, known for its versatility in laboratory settings. The device stands upright, with a prominent, user-friendly digital interface at the top front. Its sleek, modern design features a large, lead-lined irradiation chamber, visible through a LCD Display, allowing for the irradiation of larger samples or small animals. The irradiator is equipped with advanced safety features, including interlock systems to prevent accidental exposure to X-rays, and is typically used for biological and medical research applications.

KUBTEC® XCELL® Free-Standing Irradiation Systems

The KUBTEC® XCELL® free-standing of X-ray irradiator system is powerful with a broad range of uses in animal research, cell research, and agricultural research. An optional X-ray imaging cabinet further increases the capabilities of the unit. The full-sized and free-standing unit has a large chamber size with room to irradiate a wide range of samples. The free-standing units are available in three sizes, XCELL 160, XCELL 225, and XCELL 320. Finally, the systems have optional radiographic detectors that provide both high-definition X-ray imaging and high-definition optical imaging.

SKU: KUBTEC_Xcell_Irradiator Categories: , , , , , , Tags: , , , , , , ,

Description

• Provides researchers with accurate, reliable, and repeatable treatments, saving time and improving efficiency.
• Systems cover a wide spectrum of applications, like small animal studies, tissue culture, and food safety research.
• X-ray irradiators are seen as the direct replacement for gamma and cesium irradiators which contain harmful isotopes and require licensure from the US Nuclear Regulatory Commission.
• The KUBTEC line of irradiators are fully US FDA 21 cfr 1020.40 compliant
• Self-contained fully shielded cabinets
• Easy to operate with no additional training or licenses required
• Provides an affordable solution to fulfill almost any radiation requirement

XCELL 160 (1.8 kW)
• Tube Potential: 20-160 kVp
• Tube Current: Up to 30 mA
• Tube Filtration: 0.8 mm Be
• Input Power: 220 VAC +/- 10%, 20 Amps, 47/63 Hz Single Phase
• Interior Chamber Size: 30” (76.2 cm) W, 30” (76.2 cm) D, 40” (101.6 cm) H
• Coverage Base Level: 14”x 14” (36 x 36 cm)
• Outside Dimensions: 46” (117 cm) L, 34” (87 cm) W, 76” (193 cm) H
• Dosage: Up to 3.2 Gy/min at 160kV, 11.3mA, 30 cm SOD, (Filter = 2mm Al)
• Optional X-Ray Imaging: Yes
• Software: DIGISOURCE®, DIGICOM®

XCELL 160 (3.0 kW)
• Tube Potential: 20-160 kVp
• Tube Current: Up to 30 mA
• Tube Filtration: 0.8 mm Be
• Input Power: 220 VAC +/- 10%, 20 Amps, 47/63 Hz Single Phase
• Interior Chamber Size: 30” (76.2 cm) W, 30” (76.2 cm) D, 40” (101.6 cm) H
• Coverage Base Level: 14”x 14” (36 x 36 cm)
• Outside Dimensions: 46” (117 cm) L, 34” (87 cm) W, 76” (193 cm) H
• Dosage: Up to 5.2 Gy/min 160kV, 18.7mA, 30 cm SOD, (Filter = 2mm Al)
• Optional X-Ray Imaging: Yes
• Software: DIGISOURCE®, DIGICOM®

XCELL 225 (3.0 kW)
• Tube Potential: 20-225 kVp
• Tube Current: Up to 30 mA
• Tube Filtration: 0.8 mm Be
• Input Power: 220 VAC +/- 10%, 30 Amps, 47/63 Hz Single Phase
• Interior Chamber Size: 30” (76.2 cm) W, 30” (76.2 cm) D, 40” (101.6 cm) H
• Coverage Base Level: 14”x 14” (36 x 36 cm)
• Outside Dimensions: 46” (117 cm) L, 47” (119 cm) W, 76” (193 cm) H
• Dosage: Up to 5.9 Gy/min 225kV, 13.2mA, 30 cm SOD, (Filter = 2mm Al)
• Optional X-Ray Imaging
• Software: DIGISOURCE, DIGICOM

XCELL 320 (3.0 kW)
• Tube Potential: Up to ± 320 kVp
• Tube Current: Up to 30 mA
• Tube Filtration: 4.0 mm Be
• Input Power: 220 VAC +/- 10%, 40 Amps, 47/63 Hz Single Phase
• Interior Chamber Size: 30” (76.2 cm) W, 30” (76.2 cm) D, 40” (101.6 cm) H
• Coverage Base Level: 14”x 14” (36 x 36 cm)
• Outside Dimensions: 52” (132 cm) L, 44” (112 cm) W, 80” (203 cm) H
• Dosage: Up to 10.0 Gy/min 320 kV, 12.9 mA, 30cm SOD, (Filter = 2mm Al)
• Optional X-Ray Imaging
• Software: DIGISOURCE, DIGICOM

Related products

Menu