ARES Scientific
+844 444 ARES
Find a Rep
Cart

Follett Symphony Plus™ ice and water dispenser 110 FB series 90 lb capacity

Ice and water or ice-only dispenser, with 12 lb (5.4 kg) of storage and separate ice and water chutes. Environmentally responsible R404a air-cooled ice machine has 24 hour production capacity of approximately 425 lb (193.0 kg) of Chewblet compressed nugget ice at water temp of 70 F (21 C); air temp. of 50 F (10 C). Ice machine equipped with automatic self-flushing and Quiet Night sleep mode. Dispenser has automatic bin level control to start and stop ice machine. Storage area insulated with CARB compliant non-HFC foam. 8.5′ (2.6 m) cord and NEMA 5-15 90º hospital grade plug provided. NSF and ETL listed.

Accessory

SKU: SYM110FB425 Categories: , , , , , , , , , Tags: , , ,

Description

Features:
• 90 lb (40.9 kg) ice storage capacity
• Removable air- or water-cooled ice machine with up to 425 lb (193.0 kg) daily production of Chewblet ice
• soft, chewable, compressed nugget ice is preferred over cubes and is ideal for patient care
• Quiet Night™ sleep mode turns off ice machine when idle

Designed with sanitation in mind:
• Automatic self-flushing of ice machine removes impurities
• Drain cup provides internal air gap for added protection of food zone components from drain line contaminants
• Agion® silver-based antimicrobial provides protection of key ice and water contact components
• One-hand lever or SensorSAFE infrared ice dispense
Dependable design, easy to service and clean:
• Cleaning and sanitizing of entire machine takes only 1 hour
• LED control board provides at-a-glance machine status
• Panels are easily removed for accessibility to all components
• Ice machine parts are common across all Symphony Plus dispensers
• Stainless steel evaporator and auger deliver long life
Environmentally responsible:
• Meets Consortium for Energy Efficiency Tier 2 specifications
• R404a refrigerant has zero ozone depletion potential
• Continuous ice making process uses less electricity and water
Durable, attractive dispenser:
• Stainless steel cabinet with accent trim
• Poly drain pan, grille and dispenser lid are corrosion-resistant
Easy installation:
• Comes fully assembled and installs with three easy connections – electric, water and drain

Additional information

Door Configuration

90lb Capacity with Lever Dispense, air cooled, Ice Only, 90lb Capacity with Lever Dispense, air cooled, 90lb Capacity with Lever Dispense, water cooled, 90lb Capacity with SensorSAFE Dispense, air cooled, Ice Only, 90lb Capacity with SensorSAFE Dispense, air cooled, 90lb Capacity with SensorSAFE Dispense, water cooled

• Ice storage capacity: 90 lb (40.9 kg)
• W1 Width, top: 25.00″ (63.5 cm)
• W2 Width, bottom: 26.25″ (66.7 cm)
• D1 Depth, top: 28.25″ (71.8 cm)
• D2 Depth, drain pan: 7.00″ (17.8 cm)
• D3 Depth, bottom: 29.44″ (74.8 cm)
• H1 Height: 68.12″ (173.0 cm)
• H2 Dispense height clearance: 7.75″ (19.68 cm)
• Ventilation clearance: air-cooled models only 4.00″ (10.16 cm) rear
• Service clearance: 12.00″ (30.5 cm) top
• C1 115 V/60/1 electrical: 11 amps, 0.8 kW, 7′ (2.1 m) cord, NEMA 5-15 90º hospital-grade plug
• C2 Potable water inlet, ice machine and dispenser: 3/8″ FPT
• C3 Drain, dispenser: 3/4″ MPT
Water-cooled ice machine connections
• C4 condenser inlet: 3/8″ FPT
• C5 condenser drain: 3/8″ FPT
• C6 Ice machine drain: 3/4″ MPT
• Air temperature: 50 -100 F (10 – 38 C)
• Water temperature: 45 – 90 F (7 – 32 C)
• Potable water pressure: 10 – 70 psi (69 – 483 kpa)
• Condenser water pressure: 10 – 125 psi (69-861 kpa)
• Heat rejection: air-cooled models – 5000 BTU/hr, water-cooled models – 1400 BTU/hr to air, 3600 BTU/hr to water
• Water flow requirement for water-cooled models: 0.25 gpm (0.95 lpm) at 50 F (10 C), 0.5 gpm (1.90 lpm) at 70 F (21 C), 1.25 gpm (4.73 lpm) at 90 F (32 C)
• Approximate net weight: 253 lb (115 kg)
• Approximate ship weight: 290 lb (132 kg)
NOTE: For indoor use only

3 years parts and labor, 5 years compressor parts

Related products

Menu
AI Nav