ARES Scientific
+844 444 ARES
Find a Rep
Cart

Follett Symphony Plus™ ice and water dispenser 25 and 50 CI series 25 lb and 50 lb capacity

Ice and water or ice-only dispenser in a countertop configuration, with 25 lb (11.4 kg) or 50 lb (22.7 kg) of storage. Environmentally responsible R404a ice machine with air or water-cooling. Ice machine produces approximately 425 lb (193.0 kg) of Chewblet compressed nugget ice at air temperature of 70 F (21 C),water temperature of 50 F (10 C). Ice machine equipped with automatic self-flushing and Quiet Night sleep mode. Dispenser has automatic bin level control to start and stop ice machine. Storage area is insulated with CARB compliant non-HFC foam. 7′ (2.1 m) cord and NEMA 5-15 90º hospital-grade plug provided. NSF and ETL listed.

Accessory

SKU: SYM25_50CI425 Categories: , , , , , , , , , Tags: , , ,

Description

Features:
• 25 or 50 lb (11.4 or 22.7 kg) ice storage capacity
• Counter-height removable air- or water-cooled ice machine with up to 425 lb (193.0 kg) daily production of Chewblet ice
• Modular ice machine slides out from behind lower front panel
• Soft, chewable, compressed nugget ice is preferred over cubesband is ideal for patient care
• Quiet Night™ sleep mode turns off ice machine when idle
Designed with sanitation in mind:
• Automatic self-flushing of ice machine removes impurities
• Drain cup provides internal air gap for added protection of food zone components from drain line contaminants
• Agion® silver-based antimicrobial provides protection of key ice and water contact components
• One-hand lever or SensorSAFE infrared ice dispense
Dependable design, easy to service and clean:
• Cleaning and sanitizing of entire machine takes only 1 hour
• LED control board provides at-a-glance machine status
• Panels are easily removed for accessibility to all components
• Ice machine parts are common across all Symphony Plus dispensers
• Stainless steel evaporator and auger deliver long life
Environmentally responsible:
• Meets Consortium for Energy Efficiency Tier 2 specifications
• R404a refrigerant has zero ozone depletion potential
• Continuous ice making process uses less electricity and water
Durable, attractive dispenser:
• Stainless steel cabinet with accent trim
• Poly drain pan, grille and dispenser lid are corrosion-resistant
• Secured top lid
Easy installation:
• Comes fully assembled and installs with three easy connections – electric, water and drain

Additional information

Door Configuration

25lb Capacity with Lever Dispense, air cooled, 25lb Capacity with Lever Dispense, water cooled, 25lb Capacity with SensorSAFE Dispense, air cooled, 25lb Capacity with SensorSAFE Dispense, water cooled, 50lb Capacity with Lever Dispense, air cooled, 50lb Capacity with Lever Dispense, water cooled, 50lb Capacity with SensorSAFE, air cooled, 50lb Capacity with SensorSAFE, water cooled, Ice Only, 25lb Capacity with Lever Dispense, air cooled, Ice Only, 25lb Capacity with SensorSAFE Dispense, air cooled, Ice only, 50lb Capacity with Lever Dispense, air cooled, Ice only, 50lb Capacity with SensorSAFE, air cooled

• Ice storage capacity: 25 Series – 25 lb (11.4 kg) 50 Series – 50 lb (22.7 kg)
• W1 Width, dispenser: 21.00″ (53.3 cm)
• W2 Width, base stand accessory: 22.75″ (57.8 cm)
• D1 Depth, entire dispenser: 24.00″ (61.0 cm)
• D2 Depth, drain pan: 7.00″ (17.78 cm)
• D3 Depth, base stand accessory: 24.38″ (61.9 cm)
• H1 Height: 25 Series – 36.00″ (91.4 cm), 50 Series – 40.00″ (101.6 cm)
• H2 Dispense height clearance: 10.50″ (26.7 cm)
• H3 Height, base stand: 33.00″ (83.8 cm)
• Ventilation clearance: air-cooled models only – 3.00″ (7.62 cm) all sides
• Service clearance: air-cooled models – 12.00″ (30.5 cm) top, 6.00″ (15.24 cm) left side water-cooled units – 12.00″ (30.5 cm) top
• Utility connection location: through back or bottom
• C1 115 V/60/1 electrical: 11 amps, 0.8 kW, 7′ (2.1 m) cord, NEMA 5-15 90º, hospital grade plug
• C2 Potable water inlet: 3/8″ FPT
• C3 Drain: 3/4″ MPT
• Water-cooled model connections: C4 condenser inlet 3/8″ FPT, C5 condenser drain 3/8″ FPT
• Heat rejection: air-cooled models – 5000 BTU/hr, water-cooled models – 1400 BTU/hr to air, 3600 BTU/hr to water
• Water flow requirement for water-cooled models: 0.25 gpm (0.95 lpm) at 50 F (10 C), 0.5 gpm (1.90 lpm) at 70 F (21 C), 1.25 gpm (4.73 lpm) at 90 F (32 C)
• Air temperature: 50 – 100 F (10 – 38 C)
• Water temperature: 45 – 90 F (7 – 32 C)
• Potable water pressure: 10 – 70 psi (69 – 483 kpa)
• Condenser water pressure: 10 – 125 psi (69 – 861 kpa)
• Approximate net weight: 188 lb (85 kg)
• Approximate ship weight: 226 lb (103 kg)
• Approximate ship weight, base stand accessory: 110 lb (50 kg)
NOTE: For indoor use only

3 years parts and labor, 5 years compressor parts

Related products

Menu
AI Nav