Vector Upright Laboratory Freezer 24.7 Cu. Ft.

Vector upright laboratory freezers are designed for the durability demands of the professional environment while protecting valuable products from temperature fluctuations. They are constructed for high usage with laboratory-grade cabinet construction and heavy-duty doors with self-closing hinges. Products are protected by precise temperature control, a powerful refrigeration system, and built-in temperature alarms.


NOTE: Accessories ship separately.


Powerful refrigeration system with low GWP refrigerant for high performance and reduced total cost of ownership
• Exclusive top-mounted modular Complete Refrigeration System (CRS)
• All refrigeration components external to storage compartment for greater usable capacity
• High volume airflow design for faster temperature recovery and uniform temperature
• Frost-free and auto-evaporating condensate

Protection for your valuable products
• Audible and visual high/low temperature and door open alarms
• Dry contacts for remote alarming
• Access port for third party monitoring
• Key door lock
• Rear-mounted on/off power switch

Precise temperature control
• Microprocessor control with digital temperature display
• Factory preset at -25 C (adjustable from -10 C to -25 C)

Laboratory-grade cabinet construction
• Full steel interior and exterior provide resistance to rust and corrosion
• Internal rounded corners
• Heavy-duty dual casters roll easily and lock securely
• 2.36″ (5.99 cm) of CARB compliant non-HFC foam throughout
• Four (4) epoxy-coated shelves standard

Heavy-duty door for ease of use and energy savings
• 2.60″ (6.60 cm) thick insulated stainless steel door with ADA compliant full-length locking handle
• Self-closing hinges lock open at 105 degrees for easy product loading

Engineered for sustainability
• R290 low GWP refrigerant
• High density foamed in place insulation (Kyoto Protocol compliant)
• Energy-efficient LED lights
• ENERGY STAR Certified
• SNAP compliant
• UL/cUL Listed

Additional information

Model Configurations

Solid Door Left Hinge, Solid Door Right Hinge

• Nominal capacity: 24.7 cu ft
• Ventilation clearance: 15.00″ (38.1 cm) top, 2.00″ (5.08 cm) back

• W1 Width: 28.35″ (72.0 cm)
• D1 Depth with handle: solid door 31.50″ (80.0 cm)
• H1 Height with casters: 79.31″ (201.4 cm)
• Casters: (4) swiveling dual-wheel casters, (2) with toe locks
• D2 Door swing: 55.91″ (142.0 cm)
• Wall bracket, seismic anchoring: standard, factory installed

• Height: 59.84″ (152.0 cm)
• Lighting: (1) LED light from top of cabinet
• Storage system: (4) full, epoxy-coated shelves
• Shelf dimensions: 20.87″ W x 25.59″ D (53.0 x 65.0 cm)
• Max. load rating per shelf: 100 lb (45 kg)

Door configurations:
• Door: solid powder coated steel
• Door lock: cylinder type with key
• Door handle: ADA-compliant, full length handle
• Door hinges: torsion rod self-closing with 105º hold open feature
• Gasket: magnetic dart style (replaceable)

• C1 Electrical: 115 V/60/1 (103 – 132 V) 5.2 run load amps, NEMA 5-15P,
118″ (3.0 m) cord.
• Maximum size of branch circuit overcurrent device: 15 amps dedicated circuit

• Temperature display: standard 3 digit, 7 segment LED
• C2 3rd party probe access: soft access port on left side of cabinet
• Temperature probe calibration: top probe calibration in 0.1º increments
• Refrigeration and defrost probes: NTC thermistor type (± 1.0 C, ± 1.8 F)
• Programmable operating range: -10 to -25 C (14 to -13 F)
• Factory preset: -25 C

• High and low product temperature alarm: audible and visual (preprogrammed)
• Door ajar alarm: audible and visual
• Probe error alarm: audible and visual
• Alarm mute: with press of key
• Remote contacts: NO/NC standard, located on back of unit

System performance:
• Refrigeration system: integral top-mounted module with 1/2 hp compressor and air-cooled condenser
• Refrigerant and charge: Low GWP R290 refrigerant, 3.9 oz
• Air circulation system: evaporator with air-forced ventilation
• Energy consumption: 5.22 kWh/day (auto-off defrost)

• Shipping size: 30.25″ W x 34.50″ D x 86.38″ H (76.8 x 87.6 x 219.4 cm)
• Approximate refrigeration module net weight: 71 lb (32 kg)
• Approximate net weight: 287 lb (130 kg)
• Approximate ship weight: 353 lb (160 kg)
• NOTE: For indoor use only

2 years parts and labor, 3 years compressor